sales@foscoconnect.com
(510) 319-9878
Silicon Valley, CA, USA
Overview
The OptiSnap® Connector Installation Tool Kit with Flat Cleaver is a comprehensive solution designed for the fast, reliable, and cost-effective field termination of fiber optic connectors. By utilizing Corning's high-precision mechanical splice technology, this kit enables rapid network installation without the need for traditional electrical power sources, heat ovens, or light-curing adhesives.
This kit includes a high-performance precision flat cleaver and all essential fiber preparation and cleaning materials housed in a rugged gray case. The system features a unique go/no-go feedback signal, allowing technicians to verify installation success immediately upon completion. With a typical installation time of less than one minute per connector, this system is a proven alternative to fusion splicing for field deployments.
Downloads
Key Features
-
Mechanical Splice Technology
Utilizes proven mechanical alignment to eliminate the need for electrical power, reducing on-site complexity and setup time. -
Go/No-Go Feedback
Provides immediate visual confirmation of a successful installation, ensuring quality control and reducing rework. -
Efficient Installation
Average termination time of less than one minute per connector, significantly increasing field productivity. -
Precision Cleaver Included
Supplied with an FBC-009 high-performance flat cleaver with diamond blade for consistent fiber end-face quality. -
Factory-Polished Ferrules
Ceramic ferrules come factory-polished to provide high-grade performance and superior end-face geometry. -
Broad Compatibility
Includes specialized ferrule adapters and cleaning tools to support multiple connector styles including LC, SC, and ST compatible variants.
Package Contents
- High-Performance Precision Flat Cleaver (FBC-009) with diamond blade and fiber handlers
- Replacement diamond blade for FBC-009
- LC 1.25 mm VFL ferrule adapter (VFL-A125)
- Standard 2.5 mm VFL ferrule adapter (VFL-A250)
- LC 1.25 mm VFL ferrule adapter kit (VFL-AKIT)
- 1.25 mm ferrule cleaning sticks (CLEAN-STICKS-125)
- 2.5 mm ferrule cleaning sticks (CLEAN-STICKS-250)
- Corning fiber cleaning fluid (FCC-CLEANER-FIBER)
- Lint-free cleaning wipes (90 count)
- Gray carrying case
Technical Specifications
| Specification | Value |
|---|---|
| Manufacturer | Corning |
| Kit Part Number | TKTOPTISNAPCF |
| Cleaver Type | FBC-009 (Flat) |
| Installation Technology | Mechanical Splice |
| Typical Insertion Loss (UPC) | 0.2 dB |
| Typical Insertion Loss (APC) | 0.3 dB |
| Operating Temperature | -40 °C to 75 °C |
| Standard Compliance | TIA/EIA 604-3, FOCIS 10, GR-1209, GR-1221 |
Frequently Asked Questions
Does this kit require electrical power for operation?
No, the OptiSnap system is entirely mechanical and requires no electrical power for heating ovens or curing lights.
What is the typical insertion loss for these connectors?
Typical insertion loss is 0.2 dB for UPC connectors and 0.3 dB for APC connectors.
How can I verify the connector was installed correctly?
The system provides a visual go/no-go feedback signal that illuminates to confirm a successful connection.
What types of fiber connectors are supported?
The toolkit includes adapters for LC, SC, and ST compatible ferrules.
Is the cleaver blade replaceable?
Yes, the kit includes a replacement diamond blade (FBC-14-15-16-BLADE) for the precision flat cleaver.