sales@foscoconnect.com
(510) 319-9878
Silicon Valley, CA, USA
Product Overview
The PulseTech Battery Jumper Kit provides reliable interconnectivity for building multi-battery banks. Consisting of 12-inch cables constructed from solid stranded copper, this kit is specifically designed to handle the wiring of lead-acid, AGM, or lithium batteries in series or parallel configurations. The cables are pre-terminated with tinned copper 3/8-inch stud rings for secure, low-resistance connections to battery terminals.
Key Specifications
- Cable Length: 12 inches
- Conductor Material: Solid stranded copper
- Terminals: Two tinned copper 3/8-inch studs
- Supported Battery Chemistries: Lead Acid, AGM, Lithium
Typical Configuration Guide
- Two 12V Batteries (Parallel): Requires 1 complete kit (add 1 additional kit for every extra battery).
- Two 6V Batteries (Series): Requires 1 kit (utilizes only one of the two cables, leaving one spare).
- Four 6V Batteries (Series-Parallel): Requires 2 complete kits.
Frequently Asked Questions
How many jumper kits do I need to connect two 12-volt batteries in parallel?
You will need exactly one kit to wire two 12-volt batteries in parallel. Each additional battery added to the parallel bank will require one additional set of cables.
Can this jumper kit be used for 6-volt battery series connections?
Yes. When wiring two 6-volt batteries in series, you only need one kit. Because a series connection between two batteries only requires a single jumper, you will use one cable and have the other left as a spare. Wiring four 6-volt batteries in a series-parallel array will require two complete kits.