RB-3GSDI-01M-T 3G SDI over MM fiber transmitter single strand, 500m reach, with RS485 channel transport, SMPTE 424M, Industrial hardened
RB-3GSDI-01M-T 3G SDI over MM fiber transmitter single strand, 500m reach, with RS485 channel transport, SMPTE 424M, Industrial hardened
The Robofiber RB-3GSDI series are digital video fiber media converters using standardized all digital optical fiber transmission technology supporting SMPTE standards. HD SDI and 3G SDI video signals can be transmitted at high quality resolution for long reaches and without any distortion through only 1 strand of fiber optic cable. Status LEDs indicate operating mode of the converters, acknowledging proper fiber, video and serial connectivity. The embedded RS485 interface allows remote control via fiber for automation applications of monitoring and control. The RB-3GSDI series are hardened for Industrial applications with wide operating temperature range and surge protectors.
RB-3GSDI-01M-T is the transmitter unit that must be matched with the RB-3GSDI-01M-R receiver unit. A single strand of fiber, MM type up to 500m reach can be used between transmitter and receiver. And an RS-485 serial interface with 2 pin block connector is available and provides transmission of serial controls from receiver back to transmitter. Maximum serial data rate is 400Kbps asynchronous. This interface helps with controls that can be made from remote end (like PTZ camera control, door lock, alarm buzzer or lights or any other smart remote devices).The RB-3GSDI converters can be installed in the RB-CH16 2RU, 19" rack mountable chassis. An additional plate needs to be changed for the same converter to be installed in the chassis.
Features
- Extends uncompressed multi-rate 3G-SDI, HD-SDI or SD-SDI video signals over multimode fiber up to 500m
- Supports SMPTE 424M, SMPTE 292M, SMPTE 259M or DVB ASI compliant signal
- 3Gbps physical data rate over fiber (Tx:1550nm/Rx:1310nm)
- Industrial temperature grade hardened units (-20 to +75 Celsius)
- Supports clock recovery and clock re-shaping
- Supports Multi-Mode Fiber distance up to 500m over one strand of 62.5/125um or 50/125um fiber only
- Transports one RS-485 2 wire interface with speed up to 400Kbps
- High quality and resolution real-time video transmission
- LED status providing rapid reading of operational status
- No EMI or RFI and no ground loops
- Supports chassis hot swap, stand alone or card operating mode