RB-EXTGE-101H Gigabit Ethernet Industrial Outdoor grade PoE 100m reach extender, cascadable, water-proof IP66
RB-EXTGE-101H Gigabit Ethernet Industrial Outdoor grade PoE 100m reach extender, cascadable, water-proof IP66
Product description
RB-EXTGE-101H is an Industrial grade inline Cat5e/Cat6 PoE extender, self-powered, that extends the twisted cable reach by another 100m for each instance. With very little load (1.2W of budget needed), cascading units can extend cable reach up to 500m. Such extender is ideal for PoE devices that must be installed out of the common 100m reach of regular cabling.
On an 802.3af device, the extender doubles the twisted pair cable loop by a simple in-line insertion. The RB-EXTGE-101H works with both 802.3af and 802.3at standards.
Technical specifications
- Industrial design, hardened for very low temperatures
- Watertight connectors IP66 rated for outdoor installation
- Low power consumption (1.2W/device) allowing multiple cascading with little power budget loss
- No external power is required, simple in-line installation on the Cat5e/Cat6 cable
- Compliant with IEEE 802.3at/af PoE standards
- Pass-Through Data Rates: 10/100/1000 Mbps half/full-duplex
- PoE Input(Pin Assignment and Polarity): Both 1/2 (-), 3/6 (+) and 7/8 (-), 4/5 (+)
- PoE Output(Pin Assignment and Polarity): 1/2 (+), 3/6 (-), Output Power: up to 22W
- Connectors: Shielded RJ-45, EIA 568A, and 568B
- Network Cable Type: Outdoor type Shielded category 5 (or higher)
- Dimensions: 185mm x 45mm x 45mm
- Mounting: Wall or shelf
- Environmental Conditions - Operating Ambient Temperature: -25 to 55°C
- Rugged design, one metal block device with wall-mounting holes