RBOPM-500 - Optical Power Meter for 850/1300/1310/1490/1550/1625nm with internal storage memory and USB connectivity
RBOPM-500 - Optical Power Meter for 850/1300/1310/1490/1550/1625nm with internal storage memory and USB connectivity
The RBOPM-500 Optical Power Meter is one of the best meters available on the market. For a fiber Plant Manager, this is an indispensable tool, allowing management and data storage for up to 1000 measurements. Optical Power Meters help to identify connectivity issues and determine potential under or over budgeting of the optical power available. RBOPM-500 has a color TFT display and features a USB interface that allows 24/7 measuring with a help of a PC. When used standalone it stores up to 1000 traces in its own internal memory. The Optical Power Meter supports WaveID and can be used in conjunction with our RBOLS-510 Optical Laser Source supplied also by ROBOfiber.
RBOPM-500 can measure MM and SM fiber light for any wavelength between 830nm and 1640nm. It is factory calibrated for 850nm and 1310nm on Multimode fiber and 1310nm/1490nm/1550nm/1610nm for Singlemode fiber. It can measure light levels between +26dBm and -50dBm with an accuracy of +/- 0.2dBm. Measurement resolution is 0.1dBm.
RBOPM-500 has an orange rubber protective case and the package includes a USB to PC connectivity cable. Three AA batteries are required to operate the power meter, batteries are NOT included. Standard ferrule connector has 2.5mm for the OPM embedded tool suitable for SC, ST, and FC optical connectors. For 1.25mm ferrules, a separate optical ferrule adapter must be purchased.
The RBOPM-500 is one of the best available Optical Power Meters on the market, using the highest quality photodiodes and allowing users to custom define up to 10 measuring wavelengths. It is a purchase that allows measuring active fibers efficiently, being an asset for any fiber professional user.
Features
- Normal OPM mode and AUTO TEST OPM mode
- WAVE ID mode and AUTO WAVE ID mode (works with RBOLS-510)
- Multi-wavelengths display in AUTO TEST mode
- 10 sets of user-defined wavelengths
- Threshold level reading setting (easy reading display for Pass/Fail)
- Manual calibration and Factory calibration for 850/1300/1310/1490/1550/1625nm wavelengths
- USB connection for PC data retrieval and 24/7 real-time test run on PC
- 1000 traces of measurement data storage in internal memory
Technical Specifications
| Model | RBOPM-500 |
| Display Range | 1310/1490/1550/1625: +26 ~ -50dBm |
| 850/1300: +26 ~ -40dBm | |
| Accuracy | +/- 0.2 dB (at 23 deg. Celsius) |
| Calibrated Wavelengths | 850nm / 1300nm / 1310nm / 1490nm / 1550nm / 1625nm |
| Resolution | 0.01dB |
| Optical Connector | SC & 2.5mm UPP |
| Automatic Power Off | Idle for 10 minutes or at Low battery warning |
| Data Capacity | 1000 traces |
| Threshold Setting | 10 custom levels - easy readable Pass/Fail results |
| Custom Wavelengths | 10 user-defined |
| Manual Calibration | Yes |
| Wave ID | Supported (can be matched with RBOLS-510 optical source) |
| Data Interface | USB 2.0 |
| Real-Time Monitoring | Internal 1 Min / 0.5s interval, 24/7 with connected PC |
| Battery Life | AA x 3, 50+ hours of operation (batteries NOT included) |
| Power supply | AA x 3 or USB cable 5V, 500mA |
| Size | 170mm * 97mm * 38mm |
| Weight | 380g without batteries |
| Storage Temperature | -20~+60 Celsius, humidity<90% non-condensing |
| Operating Temperature | -10~+50 Celsius, humidity<90% non-condensing |
| Warranty | 2 years |