Spider Fan-Out Kit - 24 Fibers, 1 meter Tubing, 250µm Fiber, Yellow Color
Corning Cable Systems' Spider Fan-Out Kit is a low-cost termination option for multifiber cables. This kit is designed for both factory and field termination of tight-buffered and loose tube non-armored cables with up to 24 fibers.
This kit provides the end-user with a craft-friendly, modular product that enables simple step-by-step assembly for successful installation. Installation of the kit eliminates the need for patch panels at low-cost termination points.
The Spider Fan-Out Kit terminates and provides pull-out protection for bare fibers (250µm). Installation of the product is simple. The cable jacket is stripped back and the fibers are threaded into the modular 6-fiber fan-out inserts. These inserts consist of six 1-meter lengths of fan-out tubing secured in a composite assembly.
The fan-out tubing provides three layers of protection consisting of a Teflon inner tube (into which the fiber is inserted), an aramid yarn strength member and an outer protective PVC jacket (3mm diameter, yellow colored). The fan-out insert then snaps into the main spider body. When all the inserts have been loaded, the outer housing is installed to complete the assembly.
- Designed for factory and field furcation
- Snap-together fan-out insert
- Dielectric/high-strength, composite material
- Three-layer protective tubing
Corning® Cable Systems Spider Fan-Out Kits are designed for both factory or field terminations of distribution or loose tube cables from 4 to 24 fibers.
The fan-out tubing provides three layers of protection consisting of a Teflon inner tube, a dielectric strength member and an outer protective PVC jacket.
A multi-piece tubular housing also shields the fan-out insert from physical damage. This re-enterable kit terminates directly to 3mm buffer tubes and requires no special tools or heat shrink.
Field Installation of Spider Fan-Out Kits for 4-24 Fiber Cables