sales@foscoconnect.com
(510) 319-9878
Silicon Valley, CA, USA
Overview
The Sumitomo Electric Lightwave TYPE-Q102-CAp-KIT-8RFH Quantum Q102-CA+ Fusion Splicer Kit is a high-precision, core-alignment splicing system engineered for demanding telecom and data center environments. This field-ready solution utilizes NanoTune™ AI technology to compensate for fiber preparation inconsistencies, significantly improving success rates and reducing the need for reworks during installation.
Designed for versatile use, the kit supports a wide range of fiber profiles, including SMF, MMF, BIF, and specialty fibers. The 8RFH configuration provides a comprehensive set of fiber holders—covering 250µm, 900µm, and loose buffer fibers—allowing technicians to switch between cable types without requiring additional hardware. The system is housed in a rugged, IP52-rated chassis, capable of withstanding 76 cm drops and delivering extended performance in the field with a high-capacity battery and a long-lasting, auto-rotating cleaver blade.
Key Features
-
NanoTune™ AI Technology
Uses advanced algorithms to automatically compensate for fiber cleave quality issues, ensuring consistent results for technicians of all skill levels. -
Multi-Fiber Holder Kit
Includes 250µm, 900µm, and 900µm loose buffer holders to support mixed-fiber jobs within a single kit. -
FC-8R Auto-Rotating Cleaver
Automatically rotates the blade to distribute wear evenly, extending blade life and reducing maintenance frequency. -
High-Speed Splicing
Achieves typical splice times of 5 seconds in Quick Mode, increasing daily productivity. -
Low-Loss Performance
Engineered for precision core alignment, delivering a typical splice loss of 0.01dB for single-mode fiber. -
Rugged Field Construction
Features an IP52-rated design that provides water and dust resistance and is drop-tested to 76 cm. -
High-Capacity Battery
Provides up to 320 splice and heater cycles on a single charge for reliable all-day operation. -
Long-Life Electrodes
Electrodes are rated for up to 6,000 arcs, minimizing the frequency of replacements in the field.
Applications
- FTTH (Fiber to the Home) installation
- Central office fiber termination
- Data center cross-connect management
- Backbone network construction
- Specialty fiber splicing in tight enclosures
Package Contents
- TYPE-Q102-CA+ Fusion Splicer
- FC-8R Auto-Rotating Fiber Cleaver
- FHS-025 250µm Single-Fiber Holders
- FHS-09 900µm Single-Fiber Holders
- FHS-025-LB5-SET 900µm Loose Buffer Fiber Holders
- JR-M03 Thermal Jacket Remover
- BU-102 Lithium-Ion Battery
- AC Adapter/Charger
- ER-10 Spare Electrodes
- Carry Case
Technical Specifications
| Specification | Value |
|---|---|
| Model | TYPE-Q102-CAp-KIT-8RFH |
| Fiber Compatibility | SMF (G.652), MMF (G.651), DSF (G.653), NZDSF (G.655), BIF (G.657), CSF (G.654), EDF |
| Fiber Count | 1f |
| Cladding Diameter | 80 - 150 µm |
| Coating Diameter | 100 - 1,000 µm |
| Splice Time (Typical) | 5 sec (Quick Mode) |
| Splice Loss (Typical) | 0.01dB (SMF) |
| Electrode Life | Up to 6,000 arcs |
| Monitor | 5" TFT color touch screen LCD |
| Battery Life | 320 cycles |
| Water/Dust Resistance | IP52 |
| Shock Resistance | 76 cm drop |
Frequently Asked Questions
Does this kit include everything needed for loose-tube fiber?
Yes, the 8RFH configuration includes the specific 900µm loose buffer fiber holders required for those applications.
How does the auto-rotating cleaver benefit the user?
The FC-8R cleaver automatically rotates its blade after each cut, ensuring the blade edge is not prematurely worn down at a single point, which reduces maintenance and consumable costs.
Can the splicer be used for bend-insensitive fiber (BIF)?
Yes, the Q102-CA+ supports various fiber profiles including G.657 BIF.
What is the typical battery performance?
The included BU-102 battery is rated for 320 splice and heater cycles on a single charge.
What is the primary benefit of NanoTune™ AI?
NanoTune™ AI analyzes the fiber preparation and adjusts splicing parameters in real-time to compensate for potential errors, helping to reduce rework and improve splice quality.