T-DG10-1500-H1 - Frosted Glass Alignment Disk, Ø1" w/ Ø1 mm Hole
T-DG10-1500-H1 - Frosted Glass Alignment Disk, Ø1" w/ Ø1 mm Hole
- Made from 1500 Grit N-BK7 Ground Glass Substrate
- Center Hole Aids Alignment Process
- Ø1" Unmounted Alignment Disk
- Three Mounted Sizes Available:
- Ø1/2" Disk in an SM05-Threaded (0.535"-40) Mount
- Ø1" Disk in an SM1-Threaded (1.035"-40) Mount
- Ø2" Disk in an SM2-Threaded (2.035"-40) Mount
- 1500 Grit Ground Glass on Both Sides
- Drilled Centering Hole
- Great for Viewing Beams Exiting a Lens Tube
This frosted glass alignment disk is made from a 1500 grit Ground Glass Diffuser. The DG10-1500-H1 is Ø1" (Ø25.4 mm), and features a Ø1 mm (Ø0.04") hole drilled in the center for alignment purposes.
The disk is ideal for use when viewing a beam exiting a lens tube as the beam can be seen through the ground glass.
An example of this is shown in the image at the top right of this page. The disk is also available mounted in SM threaded cells in the section below.