T-RP20 - Reflection Probe with Round Leg, Ø200 µm, High-OH (250 - 1200 nm), SMA Connectors, 2 m Long
T-RP20 - Reflection Probe with Round Leg, Ø200 µm, High-OH (250 - 1200 nm), SMA Connectors, 2 m Long
Features
- Fiber Optic Y-Cables for Reflection and Fluorescence Spectroscopy
- Three Wavelength Ranges Available
- 250 - 1200 nm
- 400 - 2400 nm
- 285 - 4500 nm
- Sample Leg Available with SMA905 Connector or Ø1/4" Probe
- Light Source End Illuminates Sample End for Sample Viewing
- Spectrometer End Carries Reflected Light from Sample
- Reinforced Stainless Steel Tubing and Steel Strain Relief Sleeves for Durability
- Y-Joint with Adjustable Fiber Clamp
- Hydroxyl Content High OH
- Wavelength Range 250 - 1200 nm
- Fiber Item # FG200UEA
- Jacket Item # FT061PS
- Light Source Leg SMA Connector, Round
- Sample Leg SMA Connector
- Spectrometer Leg SMA Connector, Single Fiber
- Fiber Core Diameter 200 ± 4 µm
- Fiber Cladding Diameter 220 ± 2 µm
- NA 0.22 ± 0.02
- Min Bend Radius Short Term 23 mm, Long Term 46 mm
- Fiber Attenuation Plot
Each connector is engraved with the fiber output configuration for that leg. Please note that the exact position of the dark fiber used as a spacer in the light source leg is not guaranteed. For the MIR fiber bundle, the dark fiber will never be in the center of the light source leg.
When choosing between bundles that use low-OH silica fiber, high-OH silica fiber, or ZBLAN MIR fiber, it is important to consider the attenuation performance in the wavelength range of interest as all three fiber types overlapping operating wavelength ranges. Low- and high-OH silica fibers provide lower attenuation at visible wavelengths, while the ZBLAN fiber provides low, relatively flat attenuation for wavelengths from 2.0 - 3.6 µm.