TB4FCOMP2B Viavi T-BERD 4000v2 1310/1550nm BFiberComplete IL/ORL & OTDR (Single Unit Only)
TB4FCOMP2B Viavi T-BERD 4000v2 1310/1550nm BFiberComplete IL/ORL & OTDR (Single Unit Only)
You can now equip each technician with a single piece of equipment that fulfills all of the traditional fiber testing requirements. The VIAVI 4100-Series FiberComplete module for the T-BERD/MTS-2000 V2, 4000 V2 and OneAdvisor 800 platforms offers the most complete fiber-testing solution for quick and easy use in characterizing point-to-point or point-to-multipoint passive-optical networks (PON).
- 4.5 s measurement time for bi-directional IL/ORL and length at two wavelengths
- Full setup and data exchange between near end and far end units for fewer mistakes and retests
- Smart Link Mapper (SLM) icon-based map view of the fiber link
- Real-time continuity check and automatic product pairing (single strand and ribbon/MPO cables)
- Manage fiber and cable results
- Step-by-step wizard lets you reference initial IL/ORL tests
- Smart Access Anywhere (SAA) for remote control and field tech support
- StrataSync enabled for centralized cloud based asset, configuration, test data and workflow management
VIAVI
4100-Series FiberComplete Module
For T-BERD/MTS-2000 V2, -4000 V2 and OneAdvisor 800 Platforms
FiberComplete™ is the first solution to fully automate all the fundamental fiber-qualification tests, such as bidirectional insertion loss (IL), optical return loss (ORL), and optical time domain reflectometry (OTDR), with one module from one optical port.
You can now equip each technician with a single piece of equipment that fulfills all of the traditional fiber testing requirements. The VIAVI 4100-Series FiberComplete module for the T-BERD/MTS-2000 V2, 4000 V2 and OneAdvisor 800 platforms offers the most complete fiber-testing solution for quick and easy use in characterizing point-to-point or point-to-multipoint passive-optical networks (PON).
Platform Compatibility
T-BERD/MTS-2000 V2: One-slot handheld modular platform for fiber network testing
T-BERD/MTS-4000 V2: Two-slot handheld modular platform for testing fiber optic networks
OneAdvisor 800: Modular Test Platform designed for the installation and maintenance of wireline and wireless networks
Key Benefits
- One powerful unit equips field technicians with all the fundamental fiber tests they need
Cuts test time by more than half with fewer connections and disconnections, automatic continuity check, and an intelligent fault finder - Minimizes training and gets reliable measurements using a single connection port that combines a fully automated process with easy-to-read results
- Optimizes workflow: Compiles test results into one complete cable view, automatically stores measurements
-
Key Features
4.5 s measurement time for bi-directional IL/ORL and length at two wavelengths - Full setup and data exchange between near end and far end units for fewer mistakes and retests
- Smart Link Mapper (SLM) icon-based map view of the fiber link
- Real-time continuity check and automatic product pairing (single strand and ribbon/MPO cables)
- Manage fiber and cable results
- Step-by-step wizard lets you reference initial IL/ORL tests
- Smart Access Anywhere (SAA) for remote control and field tech support
- StrataSync enabled for centralized cloud based asset, configuration, test data and workflow management
Applications
- Measure bidirectional OTDR, IL, and ORL with one unit
- Troubleshoot in FaultFinder mode for immediate results
- Conduct acceptance tests in Bidirectional OTDR mode
- Certify ribbon and MPO-based cables by adding VIAVI MPO switch module
Specifications (Typical at 25ºC)
General
Weight: 0.35 kg (0.77 lb)
Dimensions (w × h × d): 128 × 134 × 40 mm (5.04 × 5.28 × 1.58 in)
Applicable fiber: SMF 9/125 µm
Interchangeable optical connectors: FC, SC, LC (PC or APC)
Built-in Power Meter (Mainframe) T-BERD/MTS-2000 V2, -4000 V2
T-BERD/MTS mainframes require the broadband power meter option for referencing
Measurement range: +5 to −50 dBm
Absolute uncertainty: ±0.2 dB
Wavelength range: 800 to 1650 nm
OTDR 4100B
Central Wavelength: 1310/1550/1625/1650 nm
Pulse Width: 5 ns to 20 µs
RMS Dynamic Range: 42/40/40/40 dB
Event Dead Zone: 0.65 m
Attenuation Dead Zone: 2.5 m
Source Function (also valid for CW source mode)
Laser safety class (21 CFR): Class 1
Wavelength at 25°C: 1310±20 nm, 1550±20 nm, 1625±10 nm
Output level into 9/125 µm fiber (CW mode): −3.5 dBm
Modulated output average level: 3 dB less
Modulation frequencies: Continuous wave, 270 Hz, 330 Hz, 1 kHz, 2 kHz
Stability (over 8h): ±0.1 dB
Output power accuracy: ±0.65 dB
Loss Test Set Function
Insertion Loss
Loss range: 40 dB
Uncertainty: ±0.2 dB
Repeatability: <0.05 dB
Result resolution: 0.01 dB
Optical Return Loss
ORL display range: Up to 55 dB
Uncertainty: ±0.5 dB3
Length
Measurement range: 150 km
Uncertainty: 0/+5 m ± 0.001% x distance
Ordering Information
FiberComplete Module with OTDR and FaultFinder Functions
Description Part Number
Part number E4126B-FCOMP-PC/-APC: 4100 Module B FiberComplete - 1310/1550 NM - PC/APC
Part number E4136B-FCOMP-PC/-APC: 4100 Module B FiberComplete - 1310/1550/1625 NM - PC/APC
Part number: E4138FB65-FCOMP-APC5: 4100 Module B FiberComplete - 1310/1550/Filtered 1650 NM - APC
Part number E4126-FCOMPFF-APC: 4100 Module FiberComplete FaultFinder - 1310/1550 NM - APC
Part number E4136-FCOMPFF-APC: 4100 Module FiberComplete FaultFinder - 1310/1550/1625 NM - APC
Options
Part Number EFCOFF2OTDR-UPG: FiberComplete upgrade to add OTDR Function
Accessories
Part number E41MPO12SM Singlemode MPO Switch Module - 1x12 Pinned MPO - SC/APC
Part number ESDFSCOPE5KI: Digital videoscope kit, including P5000i probe, soft case, and 7 inspection tips
Part number EOFS200: Optical Fiber Cable software
Part number ENRTERMKIT: Additional Nonreflective optical terminators kit
Test Process Automation (TPA)
Allows your team to deliver expert-level test results and close projects on the first try, every time. TPA is a closed loop test system that optimizes workflows, eliminates manual, error prone work and automates immediate data reporting for job close out, team progress updates and network health analytics. Execute jobs efficiently to ensure high quality network builds, rapid turn-up/activation and enhanced operational visibility.
Inspect Before You Connect (IBYC)
Contamination is the number 1 reason for troubleshooting optical networks. Proactive inspection and cleaning of fiber connectors can prevent poor signal performance, equipment damage, and network downtime.
VIAVI Care Support Plans
Increase your productivity for up to 5 years with optional VIAVI Care Support Plans:
- Maximize your time with on-demand training, priority technical application support and rapid service.
- Maintain your equipment for peak performance at a low, predictable cost. Plan availability depends on product and region. Not all plans are available for each product or in every region. To find out which VIAVI Care Support Plan options are available for this product in your region, contact your local representative or visit: viavisolutions.com/viavicareplan