THKM100B-M - 48.6 mm x 48.6 mm Kinematic Platform Mount
THKM100B-M - 48.6 mm x 48.6 mm Kinematic Platform Mount
- Two 80 TPI Adjusters for ±3° or ±4° of Fine Tip and Tilt Control
- Platform Can Be Oriented Horizontally or Vertically
- Designed for Use with Clamping Arms (Sold Below)
- Removable Knobs Expose Adjuster Screws with Hex Socket
- #8 (M4) Through Holes in Back Plate of Mounts for Ø1/2" Post Mounting
- Fabricated from Black Anodized Aluminum
THKM100B(-M) and THKM200B(-M) Kinematic Platform Mounts provide kinematic control for prisms and non-standard optics. Each contains several 6-32 (M4) tapped holes for mounting our THPM3(-M) or THPM4(-M) Clamping Arms (sold below). The THKM200B(-M) additionally contains five 1/4"-20 (M6) tapped holes and four #8 (M4) counterbores that provide direct mechanical compatibility with standard optomechanics. The design used in the THKM100B(-M) and THKM200B(-M) offers an unobstructed path from any direction by positioning the knobs below the mounting plane, as shown in the photo to the right.
| Kinematic Platform Mount Specifications | |||||||
|---|---|---|---|---|---|---|---|
| Item # | Mounting Platform | Adjuster Thread | Angular Range | Post Mounting | |||
| Dimensions | Tapped Holesa | Clearance Holes | |||||
| THKM100B | 1.92" x 1.92" (48.6 mm x 48.6 mm) |
6-32 (5 Places) | N/A | 1/4"-80 | ±4° | #8 Counterbore (3 Places) | |
| THKM200B | 2.90" x 2.90" (73.7 mm x 73.7 mm) |
6-32 (4 Places) 1/4"-20 (5 Places) |
#8 (4 Places) | ±3° | #8 Counterbore (7 Places) | ||
| THKM100B-M | 48.6 mm x 48.6 mm (1.92" x 1.92") |
M4 (5 Places) | N/A | ±4° | M4 Counterbore (3 Places) | ||
| THKM200B-M | 73.7 mm x 73.7 mm (2.90" x 2.90") |
M4 (4 Places) M6 (5 Places) |
M4 (4 Places) | ±3° | M4 Counterbore (7 Places) | ||