Archived

:: Overview of Corning Rack Mount Fiber Optic Patch Panel Corning Cable System’s Closet Connector Housing (CCH) fiber optic patch panels fit into a 19 inch and 23 inch utility racks. This document describes the installation procedure for CCH-01U (1U) and CCH-02U (2U) enclosure. You can purchase a separate adapter bracket kit to mount them to a 24 inch rack. Another adapter bracket kit is available to install the units on a wall. The CCH-01U patch panel accepts up to 2 connector panels or modules and occupies one rack space (1U). The CCH-02U patch panel accepts up to 4 connector

The Purpose of TIA-942 Standard The purpose of TIA-942 standard is to provide requirements and guidelines for the Design and Installation of a data center or computer room TIA-942 standard will enable design to be involved early in construction process TIA-942 allows for long term planning of data centers to support growth and future applications TIA-942 includes guidelines for data center design, cabling system infrastructure, telecommunications spaces and topologies, cabling systems, cabling pathways, redundancy and informative annexes. What is a Data Center? Data center is a building or portion of a building whose primary function is to house a computer

>> Applications of Fiber Optic Coupler Fiber optic couplers are used to split the input signals into two or more outputs, they are called splitters in this case.  On the other hand, some types of couplers can be used to combine two or more inputs into one single output, they are called combiners in this case.   >> Fiber Optic Coupler Types 1. Y Coupler Y coupler is also called tap coupler. This type of coupler simply divides the signal into two outputs. The power distribution ratio between two outputs can be precisely controlled, such as 10/90 percent, 20/80 percent,

Never directly pull on the fiber itself. Fiber optic cables have Kevlar aramid yarn or a fiberglass rod as their strength member. You should pull on the fiber cable strength members only! Never exceed the maximum pulling load rating. On long runs, use proper lubricants and make sure they are compatible with the cable jacket. On really long runs, pull from the middle out to both ends. If possible, use an automated puller with tension control or at least a breakaway pulling eye. Know and observe the maximum recommended load rating of the cable. Never exceed the cable bend radius.

In this tutorial, we will discuss the maximum distance that a fiber cable can transmit without an amplifier or repeater. This distance is limited by the fiber’s attenuation (loss) and dispersion (pulse widening). In practice, fiber link distance can be extended by using fiber amplifiers and dispersion compensators. >> Fiber Distance Limit by Attenuation For a practical fiber optic communication link, the Bit Error Ratio (BER) must be less than 10-9. Based on this BER requirement, there must be a minimum number of photons per bit of information. Let’s assume this minimum number is Np, then for a bit rate